Sulpher Hexa Flouride ( SF6 ) Circuit Breakers

In this circuit breaker, sulphur hexaflouride ( SF₆ ) gas is used as the arc quenching medium. The sf₆ gas is an electro negative gas and has a strong tendency to absorb free electrons. The contacts of the breaker are opened in a high pressure flow of sf₆ gas and an arc is struck between them. The conducting free electrons in the arc are rapidly captured by the gas to form relatively immobile negative ions. This loss of conducting electrons in the arc quickly builds up enough insulation strength to extinguish the arc. The sf₆ circuit breakers are very effective for high power and high voltage service.

Construction: Fig 15 shows the parts of a typical sf₆ circuit breaker. It consists of fixed and moving contacts enclosed in a chamber called arc interruption chamber containing sf₆ gas. This chamber is connected to sf₆ gas reservoir. When the contacts of breaker are opened the valve mechanism permits a high pressure sf₆ gas from the reservoir to flow towards the arc interruption chamber. The fixed contact is a hollow cylindrical current carrying contact fitted with an arc horn. The moving contact is also a hollow cylinder with rectangular holes in the sides to permit the sf₆ gas to let out through these holes after flowing along and across the arc. The tips of fixed contact, moving contact and arcing horn are coated with copper-tungsten arc resistant material. Since sf₆ gas is costly, its reconditioned and reclaimed by a suitable auxiliary system after each operation of the breaker.

Working: In the closed position of the breaker the contacts remained surrounded by sf₆ gas at a pressure of about 2.8 kg/cm². When the breaker operates the moving contact is pulled apart and an arc is struck between the contacts. The movement of the moving contact is synchronized with the opening of a valve which permits sf₆ gas at 14 kg/cm² pressure from the reservoir to the arc interruption chamber. The high pressure flow of sf₆ rapidly absorbs the free electrons in the arc path to form immobile negative ions which are ineffective as charge a carriers. The result is that the medium between the contacts quickly builds up high dielectric strength and causes the extinction of the arc. After the breaker operation the valve is closed by the action of a set of springs.

Advantages over oil and air circuit breakers:

a. Due to superior arc quenching property of sf₆ , such breakers have very short arcing time

b. Dielectric strength of sf₆ gas is 2 to 3 times that of air, such breakers can interrupt much larger currents.

c. Gives noiseless operation due to its closed gas circuit

d. Closed gas enclosure keeps the interior dry so that there is no moisture problem

e. There is no risk of fire as sf₆ is non inflammable

f. There are no carbon deposits

g. Low maintenance cost, light foundation requirements and minimum auxiliary equipment

h. sf₆ breakers are totally enclosed and sealed from atmosphere, they are particularly suitable where explosion hazard exists

Disadvantages:

a. sf₆ breakers are costly due to high cost of sf₆
b. sf₆ gas has to be reconditioned after every operation of the breaker, additional equipment is
required for this purpose

Applications: sf₆ breakers have been used for voltages 115kV to 230 kV, power ratings 10 MVA to 20 MVA and interrupting time less than 3 cycles.

Written by arjun on October 12th, 2008 with 7 comments.
Read more articles on circuit breakers and Power System and SF6 Circuit Breaker and Switchgear&Protection.

Related articles

• Auto-Reclosure (October 12th, 2008)
• Vacuum Circuit Breakers( VCB ) (October 12th, 2008)
• Types of Air-Blast Circuit Breakers (October 11th, 2008)
• Air Blast Circuit Breaker (October 11th, 2008)
• Low Oil Circuit Breaker (October 10th, 2008)